BGVPR - GRAY GLOSS ENAMEL TT-E-5O6K C-16187
- MSDS: BGVPR
- Manufacturer: EVERSEAL MANUFACTURING CO INC
- Product Name: GRAY GLOSS ENAMEL TT-E-5O6K C-16187
- National Stock Number: 8010-00-616-7683
Product Identification
Product ID:GRAY GLOSS ENAMEL TT-E-5O6K C-16187
MSDS Date:08/29/1986
FSC:8010
NIIN:00-616-7683
MSDS Number: BGVPR
Responsible Party
RIDGEFIELD, NJ 07657
Emergency Phone: 201-943-4986
Info Phone: 201-943-4986
Preparer: FRANK PRIMERANO
Cage: EO432
Contractor
Telephone: 201-943-4986
Cage: 72988
Ingredients
5 G/KG,ORAL (MFR).
Fraction By Weight: 32%
OSHA PEL N/K
ACGIH TLV: N/K
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 16%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
CALCIUM CARBONATE.ACGIH IS FOR NUISANCE PARTICULATES.
Fraction By Weight: 9%
OSHA PEL N/K
ACGIH TLV: 10 MG/CUM TWA (1988)
ALUMINUM SILICATE.
Fraction By Weight: 7%
OSHA PEL N/K
ACGIH TLV: N/K
RESIN.
Fraction By Weight: 33%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:IRRITATION.SKIN:DRYING OF
SKIN.INHALATION:EXCESSIVE INHALATION MAY CAUSE
ANESTHESIA,HEADACHE,DIZZINESS,NAUSEA,UPPER RESPIRATORY
IRRITATION.INGESTION:N/K .
Medical Cond Aggravated by Exposure:N/K
First Aid
First Aid:EYES:FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MIN
.SKIN:WASH WITH MILD SOAP & WATER.APPLY A MILD CREAM.IN SEVERE
CASES CONTACT A PHYSICIAN.INGESTION:CALL A PHYSICIAN.INHALATION:REM
OVE TO FRESH AIR.APPLY ARTIFICIAL RESPIRATION IF NECESSARY.CALL A
PHYSICIAN.
Fire Fighting
Flash Point:105F,40.56C
Lower Limits:N/K
Upper Limits:0.7
Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .WATER IS NOT A SUITABLE EXTINGUISHING MEDIUM.
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION MAY YIELD CARBON
MONOXIDE & CARBON DIOXIDE.
Accidental Release
Spill Release Procedures:FLUSH WITH WATER INTO RETAINING AREA OR
CONTAINER.AVOID SPARKS,FIRE OR HOT METAL SURFACES.SMALL QUANTITIES
MAY BE ABSORBED ONTO AN APPROPRIATE ABSORBANT.
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:KEEP COOL AND AWAY FROM SOURCES OF
IGNITION.USE ADEQUATE VENTILATION AND AVOID PROLONGED AND REPEATED
PERSONAL EXPOSURE.
Other Precautions:N/K
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:IMPERMEABLE
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:APRON,BARRIER CREAM.
Work Hygienic Practices:N/K
Supplemental Safety and Health
N/K
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:326-387F
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:>AIR
Spec Gravity:1.2 (WATER=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:N/K
Appearance and Odor:LIQUID.
Percent Volatiles by Volume:0.50
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT,SPARKS,OPEN FLAME,FIRE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
MONOXIDE AND CARBON DIOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.